0

Out of 0 Ratings

Owner's of the Makita Cordless Saw Slide Compound Miter Saw gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 37
 
P 2/ 37
Specification (cont.)
Cutting capacities [Height x Width in mm (")]
with 255mm (10") saw blade
North America
Miter angle
Bevel angle
0 degree
45 degrees left
71 x 305 (2-13/16 x 12)
91 x 279 (3-5/8 x 11)
47 x 305 (1-7/8 x 12)
61 x 279 (2-3/8 x 11)
29 x 305 (1-1/8 x 12)
43 x 279 (1-11/16 x 11)
45 degrees left & right
71 x 215 (2-13/16 x 8-1/2)
91 x 197 (3-5/8 x 7-3/4)
47 x 215 (1-7/8 x 8-1/2)
61 x 197 (2-3/8 x 7-3/4)
29 x 215 (1-1/8 x 8-1/2)
43 x 197 (1-11/16 x 7-3/4)
71 x 187 (2-13/16 x 7-3/8)
91 x 171 (3-5/8 x 6-3/4)
45 degrees right0 degree
52 degrees left & right
71 x 152 (2-13/16 x 6)
91 x 139 (3-5/8 x 5-1/2)
60 degrees right
Crown molding,
45 degree type
168 (6-5/8)**Diagonal cut*
Workpiece Capacity: mm (")How to cut
120 (4-3/4)Vertical cut***
Baseboard
(Skirt board)
Cutting capacities [Height x Width in mm]
with 260mm (10-1/4") saw blade
All countries except North America
All countries
Miter angle
Bevel angle
0 degree
45 degrees left
68 x 310
91 x 279
42 x 310
58 x 279
29 x 310
43 x 279
45 degrees left & right
68 x 218
91 x 197
42 x 218
58 x 197
29 x 218
43 x 197
68 x 190
91 x 171
45 degrees right0 degree
52 degrees left & right
68 x 155
91 x 139
60 degrees right
Capacities of cutting Crown molding and Baseboard (Skirt board)
with 255mm (10”) or 260mm (10-1/4") saw blade at 0 degree/ 0 degree
[Cutting Capacities]
* Diagonal cut is to cut a crown molding that is
held tilted against the guide fence using
Crown molding stopper.
** The capacity of crown molding diagonal cut
is the length L shown in the drawing on right.
***Vertical cut is to cut a baseboard (skirt board)
that is clamped with Horizontal vise.
L