La Crosse Technology Automobile Alarm Atomic Alarm Clock User Manual

0

Out of 0 Ratings

Owner's of the La Crosse Technology Automobile Alarm Atomic Alarm Clock gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 5
 
La Crosse Technology, Ltd Page 3
Time is off by hours
Check to see if the WWVB Tower icon appears on the atomic alarm clock. If not, the atomic
alarm clock has not received a WWVB time signal in the past 24 hours.
Reposition the atomic alarm clock with the front or back facing Colorado.
Check that the Time Zone selected correctly reflects your location. Adjust the time zone in
the Program Menu.
Check that the DST indicator is correct for your location (most areas observe DST so this
should be ON). Adjust the DST indicator in the Program Menu.
Large buildings, metal roofed buildings and buildings or rooms full of electrical and/or radio
equipment make it difficult to receive the WWVB time signal.
Daylight Saving Time
Dependent on your location, position of the clock in your home, and atmospheric
interference, it may take up to 5 nights for the change from Daylight Savings Time to
Standard Time and vice-versa to occur.
Check for a WWVB Tower Icon showing on the atomic alarm clock. The tower icon indicates
you have received the WWVB signal from Ft Collins CO in the past 24 hours.
Check that the clock is in the correct Time Zone.
Check whether the DST indicator is ON or OFF. If the indicator is OFF the clock will not
change.
Check for fresh batteries. Without proper batteries, the antenna will have a harder time
picking up the signal.
Position the atomic alarm clock in a window (with the front or back) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this direction,
position the clock near an outside wall and point the unit in this general direction.
Manually Set Time/Date: Program Menu
The SET button will move through the program menu. The UP or DOWN buttons will change a
value.
12/24 HOUR TIME: 12Hr will flash. Press and release the UP or DOWN buttons to select
24hr. Confirm with the SET button and move to the next item.
HOUR: The hour will flash. Press and release the UP or DOWN buttons to select the correct
hour. Confirm with the SET button and move to the next item.
MINUTES: The minutes will flash. Press and release the UP or DOWN buttons to select the
correct minutes. Confirm with the SET button and move to the next item.
YEAR: The year will flash. Press and release + or - buttons to select the correct year.
Confirm with the SET button and move to the next item.
MONTH: The month will flash. Press and release the UP or DOWN buttons to select the
correct month. Confirm with the SET button and move to the next item.
DATE: The date will flash. Press and release the UP or DOWN buttons to select the correct
date. Confirm with the SET button and exit the program menu.
DAYLIGHT SAVING TIME: DST will flash and the word ON. Press and release the UP or
DOWN buttons to turn this to OFF if you do not observe DST. Confirm with the SET button
and move to the next item.
Note: The Day of the Week will set automatically after the year, month and date are set.
Note: If no buttons are pressed for 20 seconds, the set mode times out.

   Find Your Products By Category