Black & Decker Cordless Saw 4-SLICE BLK/CHRM TOASTER User Manual

0

Out of 0 Ratings

Owner's of the Black & Decker Cordless Saw 4-SLICE BLK/CHRM TOASTER gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 24
 
5
CONNECTING A VACUUM CLEANER TO
THE TOOL (FIGURE B)
dust

USE
WARNING: To reduce the risk of
injury, never use the tool when the saw
shoe is loose or removed.
ADJUSTING THE SHOE PLATE FOR
BEVEL CUTS (FIGURE C)

straight cut or a left or right bevel cut at an
angle of 45°.



45° location.

To reset the shoe plate for straight cuts:




Switching On and Off

speed switch (1). The tool speed depends
on how far you depress the switch.


speed switch. This option is available only
at full speed.

speed switch. To switch the tool off, when
in continuous operation, press the variable
speed switch once more and release it.
How to Use the Sightline
®
Feature (gure D)


Viewing from directly above the jig saw the
line of cut can be easily followed.
HINTS FOR OPTIMUM USE
General

speed for aluminum and PVC and a low
speed for metals other then aluminum.
Sawing laminates
As the saw blade cuts on the upward

surface closest to the shoe plate.



scrap wood or hardboard to both sides of the

Sawing metal
WARNING: Do not use a vacuum when
cutting metal. Metal filings will be hot and
may cause a fire.

more time than sawing wood.

metal.




line of cut.
Rip Fence
Ripping and circle cutting without a pencil
line are easily done with a rip fence and

Attaching Rip Fence (gure E & F)

cross bar (11) facing down as shown in
figure E.

shoe.

lipped edge facing down and pointing
towards the rear of the saw.

screw into the threaded hole in the bar
clamp as shown in figure F.

B
5
8
C
9
D
10
F
E
11
13
12

   Find Your Products By Category