Black & Decker Edger Black & Decker Edger User Manual

0

Out of 0 Ratings

Owner's of the Black & Decker Edger Black & Decker Edger gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 48
 
13
maIntenance
WARNING: Toavoidseriousinjury,removethebatteryfrom
thetoolbeforeperforminganymaintenance.
1. Keeptheairintakeslots cleantoavoidoverheating.
2. Yourtrimmerlinecandryoutovertime.Tokeepyourlineintop
condition,storesparepre-woundspoolsorbulklineinaplastic,
sealablebagwithatablespoonofwater.
3. Plasticpartsmaybecleanedbyusingamildsoapandadamprag.
4.Thelinecutterontheedgeoftheguardcandullovertime.Itis
recommendedyouperiodicallytouch-upthesharpnessofthe
bladewithafile.
trouble shootIng guIDe
problem
Toolrunsslowly.
Automaticlinefeeddoesnot
feedmoreline.
solutIon
•Removebatteryfromtool.
•Checkthatthespoolhousing
canrotatefreely.Carefullyclean
itifnecessary.
•Checkthatthecuttingline
doesnotprotrudemorethan
approximately4-13/16inches
(122mm)fromthespool.
Ifitdoes,cutitoffsothatitjust
reachesthelinetrimmingblade.
•Morelineisfedwhentheline
shortenstoapproximately3
inches(76.2mm).Todetermine
ifthelineisnotfeeding,letline
wearpastthispoint.
problem
Automaticlinefeeddoesnot
feedmoreline.
solutIon
•Keepthetabsdepressedand
removethespoolfromthespool
housinginthetrimmerhead.
•Ensurethatthelineisnot
crisscrossedonthespoolas
detailedinfigure U.Ifitis,
unwindthecuttingline,then
winditbackonthespoolneatly
sothatthelinesdonotcross.
•Inspecttracksatthebottomof
spoolfordamage.Ifdamaged,
replacespool.
•Readthecodeonthebackof
spool.Ifitreads“PA66”call
customerserviceforareplacement.
Ifitreads“ABS”thisisnottheissue.
•Pullthecuttinglineuntilit
protrudesapproximately4-13/16
inches(122mm)fromthespool.If
insufficientcuttinglineisleftonthe
spool,installanewspoolofcutting
line.
•Alignthetabsonthespoolcap
withthecutoutsinthehousing.
•Pushthespoolcapontothehousing
untilitsnapssecurelyintoplace.
•Ifthecuttinglineprotrudes
beyondthetrimmingblade,cut
itoffsothatitjustreachestheblade.
Iftheautomaticlinefeedstilldoes
notworkorthespoolisjammed,try
thefollowingsuggestions:
•Carefullycleanthespooland
housing.
•Removethespoolandcheckifthe
leverinthespoolhousingcan
movefreely.

   Find Your Products By Category