0
Owner's of the Black & Decker Grinder 5.5A 4-1/2" GRINDER gave it a score of 0 out of 5. Here's how the scores stacked up:
6
activities. Wear protective clothing
and wash exposed areas with soap
and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING:
Use of this tool can
generate and/or disperse dust, which may
cause serious and permanent respiratory or
other injury. Always use NIOSH/OSHA
approved respiratory protection appropriate
for the dust exposure. Direct particles away
from face and body.
WARNING: Do not operate this
tool for long periods of time. Vibration
caused by the operating action of this tool
may cause permanent injury to fingers,
hands, and arms. Use gloves to provide
extra cushion, take frequent rest periods,
and limit daily time of use.
WARNING: When not in use, place
grinder on a stable surface where it will
not move inadvertently, roll or cause a
tripping or falling hazard. The grinder
may stand upright on the battery pack but
may be easily knocked over. Serious
personal injury may result.
WARNING:
The grinding wheel or
accessory may loosen during coast-
down of the tool when shut off. If grinding
wheel or accessory loosens, it may dismount
from the machine and may cause serious
personal injury.
CAUTION: To reduce the risk of
personal injury, use extra care when
working into a corner or edge because a
sudden, sharp movement of the tool may
be experienced when the wheel or other
accessory contacts a secondary surface or
a surface edge.
•
When using an extension cord, be
sure to use one heavy enough to
carry the current your product will
draw. An undersized cord will cause
a drop in line voltage resulting in
loss of power and overheating. The
following table shows the correct size
to use depending on cord length and
nameplate ampere rating. If in doubt,
use the next heavier gage. The smaller
the gage number, the heavier the cord.
SYMBOLS
following symbols. The symbols and
their definitions are as follows:
V ..................volts
A ..................amperes
Hz ................hertz
W .................watts
min ..............minutes
or AC ...... alternating current
or DC ...direct current
n
..................rated speed
................Class I Construction
(grounded)
..............earthing terminal
................safety alert symbol
................Class II Construction
(double insulated)
.../min or rpm ...revolutions or reciprocation
per minute
............Read instruction manual
before use
................Use proper eye protection
................
Use proper hearing protection
................
Use proper respiratory protection
FUNCTIONAL DESCRIPTION
1. On/off switch
3. Spindle lock
4. Guard
MINIMUM GAUGE FOR CORD SETS
Volts Total Length of Cord in Feet
Ampere Rating
More Not more American Wire Gauge
Than Than
4
3
2
1
Find Your Products By Category
Please Login
