0
Owner's of the La Crosse Technology Clock Atomic Projection Alarm with Indoor and Outdoor Temperature gave it a score of 0 out of 5. Here's how the scores stacked up:
7
Snooze
1. When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10 minutes.
The snooze icon Zz will flash when the snooze feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The alarm icon will remain
solid.
Note: When the alarm sounds, it continues for 2 minutes and then shuts off completely.
Backlight and Projection Intensity
Hold two seconds, and then release the SNOOZE/LIGHT button to adjust the brightness of the backlight
and projection (together):
High intensity: (default setting on A/C power)
Low intensity: Press and release SNOOZE/LIGHT button once
OFF: Hold and release SNOOZE/LIGHT button
ON: Hold and release SNOOZE/LIGHT button
Projection
Battery Power:
Press and release the SNOOZE/LIGHT button to show the projection for 10 seconds.
Note: Projection will not display constantly when operating on battery power.
A/C Power:
Projection is displayed constantly
Note: can be turned off see “Backlight and Projection Intensity”
Rotate Projection:
Press and release the PROJECT button to rotate projection image 90 degrees on the wall or ceiling.
Press and release the PROJECT button again to rotate another 90 degrees.
Projection Arm Rotation:
The projection arm can be rotated 180 degrees to view the projection on the wall or ceiling.
Change Projection Mode:
Hold two seconds, and then release the PROJECT button to switch
projection modes. You will need to watch the projection image to view the
changes.
Time and Outdoor Temperature: alternate every 5 seconds (default)
Time: Hold and release PROJECT button
Outdoor Temperature: Hold and release PROJECT button again
Note: Both Time and Outdoor Temperature will not show at the same time.
Find Your Products By Category
Please Login
