0

Out of 0 Ratings

Owner's of the Schumacher Automobile Battery Charger Automatic gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 52
 
6
See CALCULATING CHARGE TIME for length of charge information.6.9
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE 7.
VEHICLE.
A spark near the battery may cause a
battery explosion. To reduce the risk
of a spark near the battery:
Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery 7.1
post usually has a larger diameter than the NEGATIVE (NEG, N, -) post.
Attach at least a 24-inch (61 cm) long 6-gauge (AWG) insulated battery cable 7.2
to the NEGATIVE (NEG, N, -) battery post.
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post 7.3
of the battery.
Position yourself and the free end of the cable you previously attached to the 7.4
NEGATIVE (NEG, N, -) battery post as far away from the battery as possible
– then connect the NEGATIVE (BLACK) charger clip to the free end of the
cable.
Donotfacethebatterywhenmakingthenalconnection.7.5
Connect the AC supply cord to the electrical outlet.7.6
When disconnecting the charger, always do so in the reverse order of the 7.7
connectingprocedureandbreaktherstconnectionwhileasfarawayfrom
the battery as practical.
A marine (boat) battery must be removed and charged on shore. To charge it 7.8
onboard requires equipment specially designed for marine use.
BATTERY CHARGING – AC CONNECTIONS8.
Riskofelectricshockorre.
This battery charger is for use on a nominal 120-volt circuit. The charger must 8.1
be grounded to reduce the risk of electric shock. The plug must be plugged
into an outlet that is properly installed and grounded in accordance with all
localcodesandordinances.Theplugpinsmusttthereceptacle(outlet).Do
not use with an ungrounded system.