ROUTER BITS (FIG. K) (NOT INCLUDED)
• Do not use router bits with a diameter greater than 1-1/8” (27mm). Use of larger than
recommended bits can result in a hazard.
Straight bit (1) Grooves and rabbets
Trimming bit (2) Trimming laminates or hardwood; accurate profiling using a
Rabbiting bit (3) Rabbets on straight or curved workpieces
V-grooving bit (4) Grooves, engraving and edge beveling
Core box bit (5) Fluting, engraving and decorative edge moulding
Cove bit (6) Decorative edge moulding
Ogee moulding bit (7) Decorative edge moulding
Rounding over bit (8) Rounding over edges
Dovetail bit (9) Dovetail joints
Chamfer bit (10) Chamfer edges
Problem Possible Cause Possible Solution
• Unit will not start. • Cord not plugged in. • Plug in cord.
• Circuit fuse is blown. • Replace circuit
• Circuit breaker is tripped. • Reset circuit
• Cord or switch is damaged. • Have cord or
at Black &Decker
Service Center or
For assistance with your product, visit our website www.black&decker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
WARNING: To prevent personal injury, always disconnect plug from power source
before performing any maintenance. Failure to do so could result in accidental
starting and possible injury.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be performed by authorized service centers
or other qualified service personnel, always using identical replacement parts.
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
WARNING: To reduce the risk of injury, do not use accessories rated below the
maximum speed on the rating plate of the tool.The use of any accessory not
recommended for use with this tool could be hazardous.
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com