2.9
Owner's of the Black & Decker Trimmer AF-100 gave it a score of 2.9 out of 5. Here's how the scores stacked up:
12
has established programs in the United States and Canada to
facilitate the collection of spent nickel-cadmium batteries. Help
protect our environment and conserve natural resources by
returning the spent nickel-cadmium battery to an authorized
Black & Decker service center or to your local retailer for recycling.
You may also contact your local recycling center for information on
where to drop off the spent battery, or call 1-800-8-BATTERY.
Full Two -Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product will be replaced or repaired at no charge in either of two
ways:
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store
is a participating retailer). Returns should be made within the time
period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a
Black & Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required.
Black & Decker owned and authorized service centers are listed
under "Tools–Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which vary
from state to state. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center. This
product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-544-6986 for a free
replacement.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, check country
specific warranty information contained in the packaging, call the
local company or see the website for warranty information.
CLEANING
• Use only mild soap and damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the tool into a liquid.
ACCESSORIES
• Recommended accessories for use with your tool are available from
your local dealer or authorized service center. If you need assistance
regarding accessories, please call: 1-800-544-6986.
• Use Black & Decker replacement spool No. AF-100. This line is
available at your local dealer or authorized service center.
• Spool cap replacement part no. RC-100-P.
• Reload nylon line (either bulk or prewrapped replacement spool) as
shown in this manual.
• USE ONLY .065 inch (1.65mm) DIAMETER NYLON MONOFILAMENT
LINE. Heavier line will overload the motor, cause overheating and will
impair the automatic feed.
• Do not use fishing line or other lines that are not recommended.
WARNING: The use of any accessory not
recommended for use with this tool could be hazardous.
Service Information
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location nearest you.
To find your local service location, refer to the yellow page directory
under "Tools–Electric" or call: 1-800-54-HOW TO (544-6986).
Battery Recycling and the RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling
Corporation) Seal on the nickel-cadmium battery (or
battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have
already been paid by Black & Decker. In some areas, it
is illegal to place spent nickel-cadmium batteries in the trash or
municipal solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC in cooperation with Black & Decker and other battery users,
13
• In case of jams and tangled
line unwrap about one foot
(30cm) of line to ensure that
it is undamaged. If it is OK
rewind it and insert the line
end through the eyelet in the
spool hub, as shown in
figure O.
• Pull the line through the hole
to maintain tension while
placing the spool down into
the hub with the notched
side exposed, as shown in
figure P.
• Press the spool down GENTLY and rotate it until you feel it drop into
place. (When in place, the spool will turn a few degrees left and right
freely.)
• Snap the spool cover back on, insert the battery and turn the tool on.
In a few seconds or less youʼll hear the nylon line being cut
automatically to the proper length.
• For trouble free feeding and best results, only use Black &
Decker replacement spools with single 0.065 inch line. Black
& Decker replacement spool model number AF-100.
REWINDING SPOOL FROM BULK LINE
(USE ONLY .065 INCH DIAMETER LINE)
Bulk line is also available for purchase from your local retailer.
NOTE: Hand wound spools from bulk line are likely to become
tangled more frequently than Black & Decker factory wound spools.
Black & Decker recommends to use factory wound spools for optimal
tool performance.
To install bulk line, follow the steps below.
• Turn off the trimmer and remove the battery.
• Press the release tabs on the line spool cover, as shown in figure N
and remove the cover by pulling it straight off.
• Remove the spool from the tool and remove and discard all line on the
spool.
• Insert one end of the bulk line into the
hole in the spool shown in
figure Q about 1/2 in. (12mm).
• Hold the line in the hole and pull the
rest of the line through the slot in the
spool, shown in figure Q.
• Snugly and evenly wind the bulk line
onto the spool in the direction of the
arrow on spool in figure Q until it is
nearly full.
• Insert the line end through the eyelet
in the spool hub, as shown in figure O. Pull the line through the hole to
maintain tension while placing the spool down into the hub with the
notched side exposed, as shown in figure P.
• Press the spool down GENTLY and rotate it until you feel it drop into
place. (When in place, the spool will turn a few degrees left and right
freely.)
• Snap the spool cover back on, insert the battery and turn the tool on.
In a few seconds or less youʼll hear the nylon line being cut
automatically to the proper length.
MAINTENANCE
• WARNING: Remove battery pack before servicing,
cleaning or removing material from the gardening appliance.
O
P
Q
AF-100 Spool
90563738 NST1024.qxd: chainsaw booklet new 5/25/10 1:13 PM Page 12
Find Your Products By Category
Please Login
