Black & Decker Trimmer SF-080 User Manual

0

Out of 0 Ratings

Owner's of the Black & Decker Trimmer SF-080 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 9
 
5
• STAY ALERT – Do not operate this unit when you are tired, ill, or under the influence of
alcohol, drugs, or medication.
• MAINTAIN APPLIANCES WITH CARE – Follow instructions in maintenance section. Keep
handles dry, clean and free from oil and grease.
• CHECK DAMAGED PARTS–Beforefurtheruseoftheappliance,aguardorotherpart
that is damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this manual.
•
DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get inside it.
• DONOTstorethetoolonoradjacenttofertilizersorchemicals.
• DONOTcleanwithapressurewasher.
• Keepguardsinplaceandinworkingorder.
• Keephandsandfeetawayfromcuttingarea.
WARNING: Do not use tool if the switch trigger does not turn the tool on or off. Any tool
that can not be controlled with the switch trigger is dangerous and must be repaired.
SAVE THESE INSTRUCTIONS
The label on your tool may include the following symbols. The symbols and their definitions are
as follows:
V volts A ..................amperes
Hz ................hertz W .................watts
min ..............minutes
...............alternating current
............direct current
n
o .................no load speed
..............
Class II Construction
.............earthing terminal
.............safety alert symbol .../min .......revolutions or
reciprocations per minute
ADDITIONAL WARNINGS FOR STRING TRIMMERS
1. Keep the air intake slots (Figure H2) clean to avoid overheating.
2. Your trimmer line can dry out over time. To keep your line in top condition, store spare pre-
wound spools or bulk line in a plastic, sealable bag with a tablespoon of water.
3. Plastic parts may be cleaned by using a mild soap and a damp rag.
4.
DO NOT immerse tool in water or squirt it with a hose. DO NOT allow any liquid to get inside it.
5. Do not store the tool on or adjacent to fertilizers or chemicals.
6. DO NOT clean with a pressure washer.
7. The line cutter on the edge of the guard can dull over time.
SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED PLUGS
CAUTION: To reduce the risk of electric shock, this equipment has a polarized plug
(one blade is wider than the other) and will require the use of a polarized extension cord. The
appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully
into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized
extension cord. A polarized extension cord will require the use of a polarized wall outlet. This
plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall
outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the
proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension
cord plug in any way.
SAFETY WARNINGS AND INSTRUCTIONS: EXTENSION CORDS
Make sure your extension cord is in good condition. When using an extension cord, be sure to use
one heavy enough to carry the current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The table shows the correct size to use
depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord. If the extension will be used outside, the cord must
be suitable for outdoor work. The
letters “WA” on the cord jacket
indicate that the cord is suitable
for outdoor use.
Total Length of Cord
25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 175 ft.
7.6 m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m 53.3 m
Wire Size AWG
18 18 16 16 14 14 12

   Find Your Products By Category