Before plugging in the tool, always check to see that the switch actuates properly and
returns to the
position when the side
the switch lever is depressed.
To start the tool, slide the switch lever to
For continuous operation, depress the front
of the switch lever and then slide to
position as above. The switch is locked on
the position for continuous operation.
To stop the tool from the locked position,
slide the switch lever to
depressing its rear part.
Depressing the rear
the switch lever.
Speed adjusting dial
The rotating speed can be changed by turning the speed adjusting dial to a given number
Higher speed is obtained when the dial is turned in the direction of number
And lower speed is obtained when
is turned in the direction of number
Refer to the table below for the relationship between the number settings on the dial and
the approximate rotating speed.
k3peed adjusting dial
The speed adjusting dial can be turned only as far as
or the speed adjusting function may no longer work.