0
Owner's of the Makita Cordless Saw Slide Compound Miter Saw gave it a score of 0 out of 5. Here's how the scores stacked up:
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Blade case, Motor section (cont.)
ASSEMBLING
DISASSEMBLING
Fig. 19
Fig. 20
Fig. 21
Handle
Pressing Handle toward the rib of Blade case,
assemble it to Motor housing by tightening
with 4x18 Tapping screws.
Pressing Lead cover holder toward Lead cover,
assemble it to Handle complete by tightening
with 4x18 Tapping screw.
Lead cover holder
rib of
Blade case
Lead cover
4x18
Tapping screw
Motor housing
(4) When assembling Motor section to Blade case, do as illustrated in Fig. 19.
[3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28)
(1) Lock Blade case at starting position as illustrated in Fig. 8. And remove Link plate as illustrated in Fig. 9.
(2) Remove Motor housing and Handle section as illustrated in Figs. 13 and 14. However, no need to remove Handle cover.
(3) Tilt Blade case in the direction of Motor housing at 45 degrees to prevent Gear portion from falling off. And then,
separate Gear section from Blade case as illustrated in Figs. 20 and 21.
1R361
Turn Bearing retainer 14-23 with 1R361 counterclockwise.
Bearing retainer can be removed from Blade case.
M5 Hex nut
M5x16 Countersunk head screw (2pcs.)
M5x16
Pan head
screw (3pcs.)
Remove the Screws illustrated
below and Bearing retainer 51.
Insert slotted screwdrivers between
Blade case and Bearing box and
lift up Bearing box as illustrated
below.
Gear section can be separated from
Blade case together with Bearing box.
Bearing
retainer 14-23
M5 Hex nut
While pressing Shaft lock, remove M5 Hex nut
with Socket bit 8.
Spring washer 5
Flat washer 5
Helical gear 28
Baring box
shaft of
Helical
gear 14
Helical gear 27
Spiral bevel
gear 32
Bearing
retainer 51
P 10/ 37
Repair
Find Your Products By Category
Please Login
