0
Owner's of the Makita Cordless Saw Slide Compound Miter Saw gave it a score of 0 out of 5. Here's how the scores stacked up:
[3] DISASSEMBLY/ASSEMBLY
[3]-5. Turn Base, Base
DISASSEMBLING
ASSEMBLING
Fig. 38
(1) Remove the parts from Turn base and Base as illustrated in Fig. 37.
(2) Removing M8x45 Hex bolt, separate Turn base section from Base as illustrated in Fig. 38.
Fig. 39
Fig. 37
1. Remove Upper fence, Lower
fence, Guide fence and Kerf
board.
Lever 45 (2pcs.)
Upper fence (2pcs.)
Kerf board
Grip 50
Lower fence (2pcs.)
Guide fence
Slide plate
Apply Grease to Slide plate and the center hole
of Base before assembling Turn base section.
Assemble Turn base section as illustrated in
Fig. 39
. And then, take the disassembling step in reverse. Refer to
Fig. 37
.
Miter scale plate
3. Remove Miter scale plate from Base by
unscrewing 4x12 Tapping screw (3pcs.)
2. Turning Grip 50 clockwise at
90 degrees, move Turn base to
the direction designated with
black arrow until it stops.
Turn base
section
Remove M8x45 Hex bolt with
Socket wrench 13.
And remove Flat washer 8.
M8x45 Hex bolt
Flat washer 8
Base
Turn base section has to be tightened with M8x45 Hex bolt
so that it can smoothly turn without wobbling.
Base
While pressing down Lock
lever, fit Turn base section
to Base.
Lock lever
While pressing down Lock
lever, remove Turn base
section from Base.
Lock lever
Flat washer 8
M8x45 Hex bolt
P 17/ 37
Repair
Find Your Products By Category
Please Login
