Out of 0 Ratings

Owner's of the Makita Cordless Saw Slide Compound Miter Saw gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 37
[3]-6. Positive lock mechanism of Turn base
Fig. 43
(1) Remove Stop ring E-7. (Fig. 40)
Grip 50, Compression spring 11, Flat washer 10 and Cam
can be removed.
(2) Remove M6x14 H.S.Binding head screw then remove
Miter lock plate in the direction designated with black
arrow. (Fig. 41)
(3) Remove CT 4x16 Tapping screw (2pcs.) and Lock lever
plate. (Fig. 42)
(4) Push Lock pin 6 in the direction designated with black
arrow and pick up Lock lever in the direction designated
with gray arrow. (Fig. 43)
(5) Remove Pin 3 from Lock pin 6, then pull out Lock pin 6 in
the direction designated with black arrow. (Fig. 44)
Fig. 45
Fig. 40
Fig. 41 Fig. 42
Fig. 44
Slide plate
Apply Grease to Slide plate and the center hole
of Base before assembling Turn base section.
Assemble Turn base section as illustrated in
Fig. 45
. And then, take the disassembling step in reverse. Refer to
Fig. 37
Turn base section has to be tightened with M8x45 Hex bolt
so that it can smoothly turn without wobbling.
While pressing down Lock
lever, fit Turn base section
to Base.
Lock lever
Flat washer 8
M8x45 Hex bolt
P 18/ 37
Stop ring E-7
Compression spring 11
Flat washer 10
Grip 50
Turn base
Groove for Stop ring E-7
Turn base
Lock pin 6Lock lever
Compression spring 13
Miter lock plate
Lock lever plate CT4x16
Tapping screw
Miter lock plate
Miter lock plate can be pulled out
without removing Pin.
M6x14 H.S.Binding
head screw
Lock pin 6Pin 3Compression
spring 6