0
Owner's of the Makita Cordless Saw Slide Compound Miter Saw gave it a score of 0 out of 5. Here's how the scores stacked up:
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Safety cover A
ASSEMBLING
Fig. 35
(1) Assemble Safety cover A section as illustrated in Fig. 34. And then mount the Safety cover A section to Safety cover B
as illustrated in Fig. 35.
(2) Mount the Safety cover section to Blade case complete as illustrated in Fig. 36.
Fig. 36
Tighten Center cover with
Hex flange head bolt M8x12.
But reserve the allowance
to move the Center cover.
Move Center cover until its
protrusion touches the flange of
M8x12 Hex flange head bolt.
Tighten Center cover with
Hex flange head bolt firmly.
4x12 Tapping
Screw (3pcs.)
Safety cover A
Mount the Safety cover A section
to the Safety cover B by tightening
with 4x12 Tapping screw (3pcs.).
Safety cover B
Center cover
Fig. 34
After applying grease to Torsion
spring 45, set the tails to Safety
cover A as illustrated below.
Torsion spring 45
Put Center washer on the Torsion
spring 45, fitting its five holes
to the five bosses of Safety cover A.
Apply Grease to this portion which
contacts the hole of Center cover .
After mounting Center cover,
assemble Center plate, fitting
its five holes to five bosses of
Safety cover A .
Center
washer
Boss
(5points)
Center
cover
Center plate
Safety cover A
P 16/ 37
Repair
Find Your Products By Category
Please Login
